Iglobalbuy Hot Foil Stamping Machine

Adjust stamping position 1. Pull out the ink pad, stick the alabaster paper larger than the external dimension of the electrotype on the stamping position of the ink pad with gummed paper and stamp with the center position of the heat transfer plate. 2. Switch on the power, the red power indicator light will be on. Turn the temperature adjustment knob to set the temperature to 100 The temperature control indicator light will be yellow and will change to green after more than 10 minutes, which represents the heat transfer plate has reached the needed temperature. (Due to the automatic constant temperature control, the signal light will change color frequently during the process of stamping operation, but it will not affect the stamping effect.) How to install stamping paper 1. Feed the stamping paper into the stamping paper holder: Take out the stamping paper holder, loosen the plastic round cover, put in the stamping paper roll, replace the plastic round cover and replace the stamping paper holder into the machine. 2. Pull the paper to the holder: Install the stamping paper according to the arrow-headed direction and pull it in clockwise direction. Firstly roll the external side of the back locating rod of the stamping, secondly stride over the external side of the front locating rod, then pass through the position between the rubber paper winding shaft and the paper pressing shaft in the clockwise direction, thirdly roll the stamping paper on the paper collecting shaft and fourthly lock with spring tab and turn the external knob of the rubber shaft to straighten up the stamping paper. Notes: The colored surface of the stamping paper must be upward. More details can be found in the manual.

Browse Our Catalog.

View More In Printing Presses & Accessories.