Printing area:Single line:Max. 4*35 app. 15 pcs of type; Double line: Max. 8*35 app. 30 pcs of type; Triple line:Max. 12*35 app. 45 pcs of types
Printing type:Arabic numbers, English letters and Chinese characters
Hot stamp ribbon:Standard width 35mm, length 100mm, coil diameter 25.4mm, color selectable
Motor reducer motor:15W,110V; Rotation speed 140turn/min
The usage method is as follows:
1.Pull out the ribbon feed wheel, disassemble its nut, external coil and ribbon paper core; replace with new ribbon, setup external coil and nut, then install the whole wheel back to the axle, and push it inside. Reel ribbon on wheel and rollers according to structure draft.
2.Change the ribbon and adjust the two-end-plate of ribbon roller, make the distance between two plates is 1mm wider than ribbon width.
3.Release two nut of connection pole. Correct length of pole should guarantee the type height should be 1.5-2mm lower than top of printed object, when print head is at the lowest poition.
4.Adjustment of temperature:
Clockwise rorate the knob of temperature to raise temperature, anticlockwise ratate to low down terperatutre. Perheat time of machine is 15-20 minutes.
5. Adjustment of control style and print speed
When control switch is turned to "automation" position, it will continuously imprint between every interruption. The seed knob on control panel is used for adjustment of print speed. Turn the speed knob clockwise to accelerate speed, anticlockwide to decelerate speed.
6.Usage of CHECK and URGENT RISE button
If there is any urgent situation happened, press URGENT RISE button, machine motor would reverse rotate to raise print head back to top position. Then you could get rid of the problems.
Usage if CHECK button: when test ribbon steps, print result and check machine,