6 Color 6 Station Screen Printing Machine Double Wheel Rotating Screen Printing Press with 110V 1600W Universal Added Flash Dryer Screen Printing Equipment
6 Color 6 Station Screen Printing Machine Double Wheel Rotating Screen Printing Press with 110V 1600W Universal Added Flash Dryer Screen Printing Equipment by Screen Printing Machine Series at Vains Faktory. MPN: 006438. Hurry! Limited time offer. Offer valid only while supplies last. Operations 1.After well installed,connect the power supply 2.Turn on the switch and the it will work automatically 3.Put the probe of the thermometer
1.After well installed,connect the power supply
2.Turn on the switch and the it will work automatically
3.Put the probe of the thermometer on the dtying table,heat for some time(20 minutes in reference)and then check the actual temp.if the temp is too low or too high,just risen or lower the height of the drying box.
Based on our text,in the condition of 24degree room temperature and no air flowing around the dryer,when the flash dryer has been working for about 30 minutes,the max temp of 0.79''(2cm) below the drying box can reach about 190degree Adopts stainless steel heater
Dryer size : 49*45*8cm（19*18*3inch）
the code number:006438 006298
Features & Highlights
- This press does not come with bracket. There are some small screws for you to fix the platen onto the pallet. Each platen comes with 4 screws. This dryer is special designed for my company's production of various single wheel and double wheel overprint screen printing machine .
- just take down one set of the screen frame arm on the press,then you can add this dryer on the press to work.after installation,the original 6 color 6 station over printing will turn to 5 color 6 station with flash dryer.if you do not need to dry,just restore the screen frame arm back to it's position.
- After add the dryer on the multi color screen press,when print one color,turn the dryer to the workstation,flash dryer a few seconds,when the substrate surface was dried,and do not stick to the screen,turn away the dryer and printing next door...it will reduce the drying time,improve work efficiency,lower work intensity.
- The dryer can be adjust 14cm up and down according to the drying requirements
- When multi-color overprint screen printing machine equipped with a dryer, we can rotate the dryer to the operation pallet to flash dry several seconds after a color printing, then the second color and so on ,to reduce the drying time ,improve the work efficiency and reduce working intensity.
|Brand:||Screen Printing Machine Series|